OEM Automotive Intake Gaskets
THROTTLE BODY TO INTAKE - GASKET 68148127AA
THROTTLE BODY TO INTAKE - GASKET 68095479AA
Intake Manifold Gasket
No results found for "Intake Gasket, Air In Gasket, In Gasket". Here are some helpful search tips:
- Search by a part name. Example: water pump.
- Be less specific. Example: brake instead of ceramic brake.
- Remove information such as make, year or model.
- Can't find the part you are looking for? Contact us and we'll find it for you!
Intake Gaskets in Brief
Intake gaskets seal the connection between your intake manifold and cylinder head, keeping air, vacuum, and, in some engines, coolant where they belong. BAM Wholesale Parts carries genuine OEM intake gaskets made for your specific engine, at wholesale pricing.
Seal Out Vacuum Leaks and Rough Idle
Heat cycles break down intake gaskets over time. A failing gasket can cause a vacuum leak, rough idle, hesitation, or lean fuel codes. On engines where coolant passes through the intake manifold, a leaking gasket can also lose coolant externally or internally. Because intake gaskets often require significant disassembly to reach, using the right gasket the first time saves labor and repeat repairs.
Intake Gasket Parts Available
- Intake manifold gaskets and gasket sets
- Upper and lower plenum gaskets
- Throttle body gaskets and seals
- Intake port seals and O-rings
- Intake bolts and fasteners for select applications
Why OEM Intake Gaskets Seal Better
Intake gaskets are designed for specific port shapes, coolant passages, bolt patterns, and operating temperatures. OEM gaskets use the material and thickness the engine was engineered around, which helps them seal evenly and resist heat and coolant. After the work involved in pulling an intake manifold, a factory gasket gives you confidence the job won't need to be done twice.
Choosing the Right Intake Gasket
Identify whether you need the upper, lower, or complete intake gasket set, and confirm your engine size. If you're doing a larger engine repair, a full gasket set may be more cost-effective than buying pieces separately. While the intake is removed, inspect nearby seals and consider replacing valve cover gaskets if they're also accessible. Browse all gaskets for other sealing needs.
Intake Gasket Fitment Guidance
Gaskets are engine-specific, and the same model may offer multiple engines. Use your VIN to confirm the correct part number. Clean both mating surfaces thoroughly, follow the factory torque sequence and specification, and avoid sealant unless the service procedure calls for it. If your engine is older or discontinued, check for superseded part numbers.
Intake Gasket Takeaways
- Vacuum leaks, rough idle, and lean codes can point to a failed gasket.
- Confirm engine size and whether you need upper, lower, or both.
- Clean mating surfaces and follow factory torque specs.
- Consider replacing nearby gaskets while the intake is off.
Intake Gasket Questions
What are symptoms of a bad intake manifold gasket?
Common signs include rough idle, hesitation, hissing, lean codes, and on some engines, coolant loss.
Can I reuse an intake gasket?
No. Once compressed and heat-cycled, intake gaskets don't reliably seal again. Install new gaskets every time.
Do I need sealant with OEM intake gaskets?
Usually not. Follow your vehicle's service procedure, since some engines require sealant only at specific corners or joints.
Should I replace other parts while the intake is off?
Often, yes. Depending on the engine, nearby gaskets, sensors, or hoses may be easier to replace while the manifold is removed, which saves labor later.