Get 10% Off Shipping With Code NOVB10
Bulk Order
Bulk Order

OEM Automotive Hoses & Clamps

Filter

availability
availability
68495789AA - : Hose for Mopar Image

Hose

Mopar 68495789AA
VENT
$16.47
MSRP $25.45
Save $8.98
35.3% Off
68583592AB - : Hose for Mopar Image

Hose

Mopar 68583592AB
BATTERY
$34.51
MSRP $53.25
Save $18.74
35.2% Off
68522763AB - : Hose for Mopar Image

Hose

Mopar 68522763AB
HEATER SUPPLY AND RETURN
$51.57
MSRP $79.60
Save $28.03
35.2% Off
68574361AA - : Hose for Mopar Image

Hose

Mopar 68574361AA
VENT
$14.31
MSRP $22.10
Save $7.79
35.2% Off
68510824AA - : Hose for Mopar Image

Hose

Mopar 68510824AA
CANISTER PURGE VALVE OUTLET
$35.05
MSRP $54.10
Save $19.05
35.2% Off
68644088AA - : Hose for Mopar Image

Hose

Mopar 68644088AA
FUEL VAPOR
$46.82
MSRP $72.25
Save $25.43
35.2% Off
68516218AA - : Hose for Mopar Image

Hose

Mopar 68516218AA
BATTERY
$15.23
MSRP $23.50
Save $8.27
35.2% Off
68624081AA - : Hose for Mopar Image

Hose

Mopar 68624081AA
SUNROOF DRAIN
$27.11
MSRP $41.85
Save $14.74
35.2% Off
68310337AC - : Hose for Mopar Image

Hose

Mopar 68310337AC
AIR CLEANER
$153.36
MSRP $238.00
Save $84.64
35.6% Off
52104911AA - : Hose for Mopar Image

Hose

Mopar 52104911AA
CLUTCH HYDRAULIC
$56.11
MSRP $86.60
Save $30.49
35.2% Off
68636336AA - : Hose for Mopar Image

Hose

Mopar 68636336AA
FUEL SUPPLY
$39.04
MSRP $60.30
Save $21.26
35.3% Off
9044512284 - : Hose for Toyota Image

Hose

Toyota 90445-12284
$5.41
MSRP $7.97
Save $2.56
32.1% Off

No results found for "Hose, Clamp, Drain Hose -clip -clamp, Washer Hose -clip -clamp, Inlet Hose -clip -clamp, Outlet Hose -clip -clamp, Hose -clip -clamp, Vent Hose -clip -clamp, Filler Hose -clip -clamp, Overflow Hose -clip -clamp, Vacuum Hose -clip -clamp, Rear Hose -clip -clamp, Upper Hose -clip -clamp". Here are some helpful search tips:

  • Search by a part name. Example: water pump.
  • Be less specific. Example: brake instead of ceramic brake.
  • Remove information such as make, year or model.
  • Can't find the part you are looking for? Contact us and we'll find it for you!


Hoses and Clamps in Brief

Hoses carry coolant, vacuum, and fluids throughout your engine bay, and a single failure can strand you or overheat the engine. BAM Wholesale Parts stocks genuine OEM hoses and clamps shaped and rated for your vehicle, at wholesale pricing.

Stop Leaks Before They Become Breakdowns

Rubber hoses break down over time from heat, pressure, and age. They can swell, crack, turn soft, or harden until they split. Clamps lose tension and corrode, which leads to leaking connections. Replacing worn hoses and clamps during routine service is one of the simplest ways to protect your cooling system and avoid an expensive roadside repair.

Hose and Clamp Parts Available

  • Upper and lower radiator hoses
  • Heater hoses and heater core hose assemblies
  • Coolant bypass and overflow hoses
  • Vacuum, PCV, and breather hoses
  • Spring, worm-gear, and constant-tension hose clamps

Why Factory Hoses Hold Up

Engine bays are tightly packed, and many hoses are molded with specific bends to route around belts, brackets, and exhaust components. OEM hoses keep those bends, so they don't kink, rub, or sit against hot surfaces. They're also built for the pressure and temperature your system runs at. Factory clamps provide the right clamping force for each connection. That combination reduces leaks and repeat repairs.

How to Pick the Right Hose

Identify which hose is failing and where it connects at both ends. Radiator and heater hoses vary by engine, so confirm your engine size. Squeeze hoses when the engine is cool: soft, spongy, or brittle hoses should be replaced. When one coolant hose fails, inspect the others and consider replacing radiator hoses and the thermostat together. Always replace clamps that are rusted or have lost tension.

Hose Fitment Guidance

The same model can use different hoses depending on engine, transmission, towing package, or rear heater equipment. Use your VIN to confirm the part number, and compare the shape of the new hose with your original before installing. After any coolant hose replacement, refill and bleed the system according to your vehicle's service procedure.

Hose and Clamp Takeaways

  • Inspect hoses for swelling, cracks, and soft spots during service.
  • Molded OEM hoses keep the correct routing and clearance.
  • Replace corroded or loose clamps with the hose.
  • Bleed the cooling system after replacing coolant hoses.

Hose and Clamp Questions

How often should I replace radiator and heater hoses?

There's no single interval for every vehicle. Inspect hoses at each service and replace them when they show swelling, cracks, or soft spots.

Can I reuse my old hose clamps?

Only if they're clean and still hold tension. Corroded or weak clamps are a common source of slow coolant leaks.

Why does the hose shape matter?

Molded bends keep the hose clear of belts and hot parts and prevent kinks that restrict flow. A straight universal hose can't always match that routing.